| PA0801 |
Non-silicone paste wax for room temperature or elevated temperature applications. Easy to apply, works equally well on metal or composite tooling. Can be used to release epoxies, polyurethanes, polyesters,and most adhesives based on those materials. Service temperature to 375° F. |
PA0801 |
| PA0810 |
A green water/alcohol solution of water soluble, film forming PVA for use as a parting agent for separation between polyester or epoxy resins and various mold surfaces. Used with PA0801 paste wax for easy, effective production release in a variety of applications. |
PA0810 |
| PA0828 |
Rich silicone release for tooling or production uses. PA0828 is the best all purpose release for metal and plastic molds - easy release every time! Also an effective lubricant |
PA0828 |
| PA0864 and PA0868 |
PA0864 and PA0868 are mold releases designed specifically for releasing thermosetting urethane elastomers from either epoxy or metal tooling in production applications. These releases are specially formulated to provide glossy surface finishes and easy release with minimal buildup on the molds. What makes PA0864 and PA0868 unique is that either release can be removed from the urethane part with soap and water clean up. It is unnecessary to solvent clean or mechanically abrade the molded surface before painting or bonding.
PA0864 and PA0868 contain the same active ingredients in the same amounts. The difference in the products is that PA0864 is made with a high flash point (non-flammable) solvent, to be used on hot molds or where flammable solvents cannot be used. PA0868 is made with Hexane solvent, for fast evaporation and short mold cycles.
Neither product is satisfactory for releasing epoxy parts. These releases have not been tested for releasing urethane foam parts. |
PA0864 and PA0868 |
